DescriptionCPE braided hose mostly can be work with coolant, diesel, oil, hydraulic fluid, pump gas, air and fuel. Please notice that the service life might be shorter when it work with fuel. This braided hose can be used in brake system, fuel pump, fuel...

Description: High Quality：Fuel tank made with high grade aluminum for extra protection Size Information：Tank measures 8" (L) x 8.25" (W) x 10" (H)Dual -10 outlets; Dual -10 vent outlets (top of cell)Fitment: Universal Appliction to Hot Rod/Street Racing/Track Cars/Truck/SUVNote: Can not be used with...

Features:--- Includes a high quality micro cotton washable and reusable cone air filter.--- The air intake kit can help your engine to draw in more cold air resulting in better          throttle response and higher explosive horsepower output.--- Piping is manufactured...

Description:1.High Quality：Fuel tank made with high grade aluminum for extra protection2.Size Information：Tank measures 19.75" (L) x 17.50" (W) x 10" (H) ; Total height: 12"; 3.Mounting tabs measure 18" (L) x 19.25" (W) Center to Center4.Dual -10 outlets; Dual -10 vent outlets (top of...

Features:Eliminating the EGR system will prevent soot from building up and clogging the EGR valve. Instead of hot exhaust gas being re-routed into the intake, fresh dense clean air can now circulate. Improved exhaust flow allows the turbocharger to spool up faster which results...

Features: Quicker turbo spool with lower EGTs Faster recirculation of the coolant resulting in lower coolant temps Longer-lasting: Stronger, more durable, and longer-lasting than OEM design.Specification:Material: Aluminum alloyColor: BlackSize: 11.1*5.2*3.1 inWeight: 3.1 lb Fitment: 11-15 Chevrolet SILVERADO 2500HD 6.6L 6599CC 403CU.IN.V8 OHV Diesel Turbine...

Item Description: 100% brand new, Never been tried or installed Outlet Size: 2.5"Primary Tube Size: 1 5/8"Head Flange Thickness: 7/16"Outlet Flange Thickness: 3/8"Designed to fit the Chevrolet Small Block 262, 265, 267, 283, 302, 305, 307, 327, 350 & 400 V8 Engine.Headers features 8-2...

Designed to optimize engine performance and extend service life, the 6.7 Cummins delete kit is designed for the 2007 to 2009 Dodge Ram 2500, 3500, 4500, and 5500. This kit includes everything you need to eliminate the Exhaust Gas Recirculation (EGR) system, including a...

Item Description: It's the ultimate performance Cold Air Intake Kit with Heat Shield  The air intake kit can help your engine to draw in more cold air resulting in better throttle response and higher explosive horsepower output The kit includes a steel heat shield that...

Description 100% Branded New Made of High-Quality Lightweight T-6061 Aluminum Material Anodized Finish for Strength and Durability Color: Black Available Size:  Female 4AN,  Female 6AN,  Female 8AN,  Female 10AN, Female 12AN AN flare caps will prevent dirt and debris from entering externally threaded hose fittings and...

Fits 2009-2024 Ram 2500/3500 6.7L Cummins Improved One-Piece DDC Stand-Pipe Bracket: Directly mounts to your engine—no more dealing with exhaust studs! Coolant Re-Route: Routes coolant to the back of the head between Cylinders #5 and #6. New Upgraded Silicone Hose Machined Aluminum Intake Blocker...

Description:The oil mist and other byproducts precipitate in the engine's intake, forming a sticky substance over time. The oil recovery tank collects the oil mist, condenses the fuel vapor, at the same time allows cleaner gas to return to the inlet.Features:Keep Engine Clean: The...

Diesel delete kits, also known as EGR delete kits, are designed to enhance vehicle performance by removing the EGR system. This eliminates components like valves and coolers, improving airflow and combustion, and leading to increased horsepower and torque.By preventing hot and dirty gases from...

Item Description: Tank measure: 15" (L) x 12.5" (W) x 10" (H). Mounting Tabs Measure : 13.75" (L) x 12.75" (W) Center to Center Safe: Fuel Tank and Cap made with high grade aluminum for extra protection.Built-In 0-90 Ohm Level Sender.Filled With Open-Cell Foam...

Description:【Fitment】--- Compatible with 1996-2000 Honda Civic CX DX EX GX HX LX Si 1.6L (except 1996 Honda Civic DX 1.6L) (Detailed adaptation is as follows)【Including】--- 1X Subrame Bar(T6061 Aluminum); 1X Lower Tie Bar(T606 Aluminum); 2X Rear Lower Control Arm (Aluminum); Other kits as picture...

Color: MetallicSurface Finish: Mirror PolishMandrel Bent TubingOptional EGR Fittings w/Block off PlateCNC Machined FlangesPolished Stainless SteelStandard Graphite Manifold Gaskets Outlet Size: 2.5"Primary Tube Size: 1.66"Head Flange Thickness: 7/16"Outlet Flange Thickness: 3/8"Restricted States: CaliforniaOxygen Sensor Location: No Port LocationFits these vehicles: for Chevy Avalanche 1500...

Description:The Malco turbo crimper impact is a simple, compact accessory that works exclusively with the power assistance of impact Driver technology to safely and efficiently crimp 30 to 24 gauge (0.41 to O.71 mm) galvanized round duct and (0.31 to 0.61 mm) black stove...

Description: 【Multi Function Application】: This Chain Breaker is suitable for pressing, breaking and riveting 520, 525 and 530 chains. Great for all types of bikes.【High Quality Material】: Made of carbon steel, this PBR Motorcycle Chain Breaker is durable and can withstand heavy use.【Product Size】:...

Item Description:Block Hugger style headers are to be used when there's no enough space because of steering and cross member clearance issues3 Bolts Collector Construction, collector Merge Spikes, gains over 20+ hpExcellent quality and durability to improve vehicle performanceShorty design for power gain from...

Features: Each Piece Is Leak Tested, O-Ringed For Leak Free InstallationEliminates soot build-up and clogged EGR ValvesCoolant temperatures run coolerPressure Tested TIG Welds Guaranteed not to LeakSpecialized designs to ensure a perfect fit and correct operation. Specification: Material: Aluminum alloyColor: Blue/BlackSize: 5.9*5.9*3.9 inWeight: 2.4...